CastleCraft Kayak Stabilizers and Outriggers

	Eathafoam Stabilizer Floats are charcoal gray in color, not white as seen in these photos Two Styles of Floats are Available Floats telescope out to a 6 ft spread, and they quickly attach without any tools Floats can be adjusted up and down to allow clearance between water when traveling or contact with water when still
Eathafoam Floats are soft, solid and pliable	Hydrodynamic Floats are rigid with hollow interior
Stabilizer frame will attach with small brackets to any point on your kayak. Specify widest portion of kayak and frame will fit any distance smaller. Middle, Bow or Stern	Eatha Foam Floats are 27" long and 6" diameter Floats have a 6" vertical adjustment (12" Maximum to Bottom of Float) Eatha Foam Floats telescope from 0" to 18" out Floats are gray, but can be painted Eathafoam floats weigh 1.1 lb each ***** Hydrodynamic Floats are 42" Long and 6" Diameter Hydrodynamic Floats are torpedo shaped and lock in place to track alongside the boat thru the water. Hydrodynamic Floats have a 10" vertical adjustment (16" Maximum to Bottom of Float) Hydrodynamic Floats telescope from 0" to 18" out Hydrodynamic Floats are rigid polyethylene and weigh 4 lbs each**

Hydrodynamic Floats on Kayak			Hydrodynamic Float

Stabilizer quickly removes from Brackets			Stabilizer Floats can be adapted to small cockpit Kayaks by installing brackets as shown. All hardware is included. Specify Model and Width of your Kayak
Also can be installed on most Sit on Top Kayaks as long as you have access through a hatch or opening to install brackets		The floats are standard gray in color, but they can be painted with most spray paints, such as this customer did to match his Hobie Mirage
Stabilizer for Small Cockpit Kayaks or Certain Sit on Tops Model SF-KS -EF with eathafoam floats 1(one) Year Warranty 248.00 + FREE SHIPPING in the 48 USA
Stabilizer for Small Cockpit Kayaks or Certain Sit on Tops Model SF-KS-HD with hydrodynamic floats 5 (five) Year Warranty 348.00 + FREE SHIPPING in the 48 USA

SF-KS-HD Hydrodynamic Floats are What Most People Order for a Kayak. They are Larger and Offer Even Greater Stability. They are Designed to Travel in the Water, While Paddling. Hydrodynamic Floats are torpedo shaped and lock in place to track alongside the boat thru the water.

SF-KS-EF Eathafoam Floats Work Well on Kayaks, but if You Place Them Aft the Cockpit, Some Find it Challenging to Reach and Lower Them Behind Your Back. Since the Eathafoam Floats are on a Center Pivot, They are not Designed to be in the Water While You Travel. Keep Them Raised out of the Water and if You Start to Tip, They Will Prevent You From Tipping Over. When you Arrive at a Location Where You Want Extra Stability, A Quick Turn of the Knob Lowers Them into Contact with the Water.

Both Models Attach to Any Point Stem To Stern on Your Kayak Many Attach Them Behind or Aft of the Cockpit as a Convenient Spot, However, You Have the Flexibility of Putting Them at any Position You May Prefer. We Suggest you Try A "Dry Run" before Permanently Mounting the Hardware and Test That Your Paddle Stroke Won't Be Affected By the Float Position.